In order to bring you the best possible user experience, this site uses Javascript. If you are seeing this message, it is likely that the Javascript option in your browser is disabled. For optimal viewing of this site, please ensure that Javascript is enabled for your browser.
RAD Australia
Home Products Last Mile (Local Loop) Copper Modems ASM-10/8 - Sync/Async Short Range Modem
Sync/Async Short Range Modem
Sync/Async Short Range Modem

ASM-10/8

Sync/Async Short Range Modem


RAD’s ASM-10/8 sync/async short range modem operates over unconditioned lines at different user-selected modes: synchronously or asynchronously, at full or half duplex. Depending on the data rate the ASM-10/8 sync/async short range modem can transmit up to distances of 10 kilometers (6.2 miles). Signal quality is guaranteed through the use of conditioned diphase modulation (EUROCOM Std D1). The ASM-10/8 sync/async short range modem comes as a chassis module or as a desktop unit.

For more information, download the Data Sheet.



Quick
Specs
Benefits
Further
Information
Related
Products
  • Selectable data rates from 2.4 kbps to 19.2 kbps
  • Full or half duplex over 4-wire
  • Controlled or continuous carrier
  • Diagnostic tests, complying with V.54 standard allow local and remote loopback
  • Available as a standalone unit or inserted as module in a ASM-MN-214 chassis

 

  • Diagnostic capabilities comply with V.54
  • Automatic equalizer
  • Line protection circuit safeguards the link from electrical damage

Further Product InformationThe ASM-10/8 is a sync/async short range modem operating full or half duplex over twisted pair, unconditioned lines in point-to-point applications. It has a maximum range of up to 10 km (6.2 miles) and operates at nine selectable rates up to 19.2 kbps.

 

Approximate Range (for 24 AWG/0.5 mm)

Data Rate - kbps

km

miles

19.2

10.0

6.0

9.6

13.0

8.0

4.8

16.0

10.0

2.4

21.0

13.1

1.2

28.0

17.5

 

Conditional diphase modulation ensures efficient transmission

The modem uses conditional diphase modulation (EUROCOM Std. D1), which provides immunity to background noise, eliminates normal line distortion and enables efficient transmission over twisted pair. Transmit timing is provided internally, derived externally from the DTE or recovered from the receive signal.

The ASM-10/8 sync/async short range modem features diagnostic capabilities complying with the V.54 standard to perform local and remote loopbacks.

The unit has a V.24/RS-232 interface and is available as a standalone unit or as a card for the 19" ASM-MN-214 rack that holds up to 14 cards.

Sync/Async Short Range Modem
ASM-20
Sync/Async Short Range Modem
Hub for Short Range Modems
ASM-MN-214
Chassis for Short Range Modems

Print Email Bookmark and Share

Data Sheet

Site Map | Print Page | Email a Friend Legal Notice | (c) 2010 RAD Data Communications, LTD